A tufted headboard king is a stylish way to add a little flair to a room and create a focus point out of bed. The realization of a tufted headquarters with a few basic materials and tools is a thrifty alternative to buying a pre-made at home merchandise where padded headboards can sometimes be expensive. With some tips and know-how, you can create your own tufted headboard in no time.
Ideas for make your own tufted headboard king, nail four 2×4 plywood together for a wooden frame. If the headboard goes behind a king size bed, it may be necessary to use two 2×4 boards and two 2×6 boards to make a longer rectangle. Lay a piece of cotton sheet wicker over the open space in the frame, so that the edges of the sheet drawer over the frame. Wrap the ends of the plate wrap around to the back of the frame and fasten into place with a staple gun.
Put a piece of fabric over the plate wrap and the wrap materials end over wooden frame, like if you are wrapping a gift. Attach the edge of the fabric to the back of the frame with a staple gun. Then for make your own tufted headboard king, place four buttons on the fabric in such a way that they resemble the four corners of a square. Use a needle and thread to sew the buttons to the fabric and tuck it behind it, pull the stitches tight until the buttons create a small toe or joint in the fabric. Hammer a line of nail over the bed wall and hang the new headboard to form the nails. Push the bed until it flares up to the headboard.
This post topic: Headboard